Well, I said I wasn’t superstitious...maybe I should be or maybe I spoke too soon. It’s probably just the machine knitting gods doing a little pay back. I haven’t said anything for a while, hoping it was just my imagination. BUT... now that No 51 arrived, safe and sound from the printers with no mixed up or missing pages, I can finally talk about it.
Not to alarm you, but it was touch and go for a while. Some things that were promised fell short at the last minute, but we had enough to fill the magazine, no sweat. Then it happened. Rick and I were in the middle of layout and we both had computer glitches - ohmigosh, talk about a little stress.
He had updated one of the programs we use for layout, to the latest and greatest. Everything was going tickety-boo and all of a sudden, the program kept shutting down. He decided to go back to the original program and I went home early. We re-convened the next night and I spent an hour watching his hunched shoulders and listening to ‘computer-speak’ as he vainly tried this and that to no avail. I went home early again, trying not to panic.
I had sent my desktop computer out the previous month to be tuned up. After getting it back it took a while for me to realize that although it was speeded up there were a few quirks, such as I was unable to burn a cd - it kept telling me that something was unhooked or missing...I had spent a bit of time trying to figure it out on my own to no avail. Needing to make some disks to go out in the mail the next day, I thought to use my newer laptop which had a cd burner but, the information was on the desktop machine. The cd drive on the desktop would read, just not burn with the program that was installed on it. I knew there was a drag-to-disc thing and attempted to use it. Having successfully loaded the stuff on a cd from the desktop, following instructions carefully, I took the new cd to my laptop, got the information installed on the laptop, and checked to see that it was there. Opened the cd record program, told it what to do and then went to eject the cd to put in a new, blank one - got a blue screen with a very scary message - I had heard other PC-ers describe this but never experienced it - the message said to shut down immediately, that everything was lost and if it failed on re-boot, oh well, too bad - or at least that’s what I thought it said. I tried to shut it down - nothing worked, just this awful blue screen with the same words over and over again. Because it was running on battery, I couldn’t even unplug the darn thing. I just left it bluescreening in the dark and went to bed.
Next morning, it was just sitting there, black. The battery had run out. I thought, okay, what’s the worst thing that can happen if I turn it on - it already told me it was done, so I had nothing to lose. I pressed ON and it booted up like nobody’s business and acted just like nothing happened. I burned my cd’s and went to the mail.
Meanwhile, back at Rick’s, he’d finally sorted out the problem and we were able to finish up No 51, leaving it a little tight at the printer’s end to meet our deadline. But all is well and we did it!!
Meanwhile, I realized I had made Nathan’s hoodie (Little Scrapper) too small - what was I thinking? - oh well,I’d make another - it was using leftovers so I didn’t even really think about it - Panama has great yardage, right? I did the back, the pockets, the sleeves and the hood and now, the fronts which are plain, are left and I’m down to the cone showing through and a swatch from his vest from No 49....this never happens to me!
You can see, the ‘happening’ (see below) made our front cover, renamed ‘Preppy’. Hope you like!
Hi,
ReplyDeleteshould your computer act up again like you described, there are some things you can do.
The following has worked for me:
1. Holding down the start button for several seconds until the computer shuts off. Then re-start as usual.
2. After removing the power cord, remove the batterie.
3. Reset your computer with the reset button.
Batterie access and reset button are usually located on the bottom of your laptop. But check your manual for these features.
You also can set your computer to give a warning when the batterie is running low, and set the warning at a level that gives you a comfortable safety cushion.
I just had severe computer problems, too; even had to pull an all-nighter to get my toy back. All my knitting and DAK live on this computer. I think, I fixed it.
Maria
Glad the issue was able to be published! I am a newbie to machine knitting and finding resources for patterns that don't look like they are straight out of 1984 is challenging. I was really glad to find your magazine! I am currently trying the pattern that you have available for download on the Knitwords website. I am just about ready to start the cables on the back piece. So far so good. No mistakes yet! LOL I hope I can get the rest of it done with as much luck. :0)
ReplyDeleteGreat as always. Don't get discouraged. You have tons of fans and support.
ReplyDelete